Niles – the Ball Bearing Glockenspiel

I have been working on a ball bearing glockenspiel. The contraption will be comprised of 3 systems – ball bearing launcher, ball bearing collection and return mechanism, and the instrument itself.

I started with the the launcher. There will be 25-30 notes and a fast and accurate launcher will be needed for each one. My design parameters were to launch 4 bearings a second within a 1/2 inch diameter over a 2 ft. drop. Here’s my first attempt.

2014-12-20 17.50.55

2014-12-20 17.51.03

A pipe feeds ball bearings to a rotating platform with a hole just large enough for one bearing. When it’s ready to drop, the servo rotates the platform by about 30 degrees and the bearing falls out the bottom. The platform then rotates back  to the home position and loads the next ball. The mechanism could definitely deliver the balls quickly but the accuracy just wasn’t there. The balls would hit the side of the hole as they were exiting. On to the next iteration…

3.0

3.0.1

I forgot to take a picture of this one so I am posting the drawings instead. The concept is the same as the previous version, except the slider is linear instead of rotary. I added a longer channel after the initial drop to guide the ball bearings as they fall. But I had the similar accuracy issues.

So, I kept iterating the design to minimize potential disturbances after the ball is launched. And of course, decided to use magnets. The bearing are made out of steel and magnets suspend the ball till a servo controlled “plunger” launches them. This design worked beautifully! I have attached two slow motion videos below. As you can see in the second video, it’s so accurate the balls are literally hitting each other like Robin Hood “splitting an arrow”!

Next, I will work on making this design more compact and also, several ball return mechanisms.

 

 

2014 RPM Challenge: Accepted!

Today is the first day the 2014 RPM Challenge, which is the National Novel Writing Month of music!  The goal of the RPM challenge is to compose and record an entire album during the month of February! I accepted the challenge by dusting off my Cacophonator and Mohogonator, and got to work making music after dinner today. As today also marks the 50th anniversary of the Beatles invasion, this project drew inspiration from the Beatles’ back catalog!

RPM_Challenge

I used the dynamic duo of Cacophonator and Mohogonator with Auditionator (i.e. Adobe Audition) to record a session for about 12 minutes at a blazing fast 192kHz sample rate.  After chopping the recording into individual tracks, I digitally slowed them down to the customary rate of 44.1kHz, thereby expanding the work to its final ~45 minute length.  For inspiration while I was recording, I listened to Beatles songs sped up to 435% (which is 192/44.1) of their customary speed.  My tracks needed a bit of post-processing: on some of them I chose to bump the pitch back up an octave or two and add “Beatle Fades” to the beginning and end.  Anyway, within twenty minutes after the recording was made, I had edited the songs and uploaded them.  You’ve read that correctly, in less time than it takes to listen to the pieces, they were composed, recorded, processed, mastered, named and uploaded.

Today is also the 50th anniversary of the first Beatles song hitting #1 on the US pop charts: “I Wanna Hold Your Hand.” This whole project was inspired by this apparent coincidence in timing, and each track was directly inspired by listening to the sped-up Beatles original.  I hope you enjoy each of the 11 tracks I created!

While My Cacophonator Gently Weeps
Got To Get You Into My Cacophonator
All You Need Is Cacophony
With A Little Help From My Cacophonator
Sgt. Cacophonator’s Lonely Hearts Club Band
Cacophonator Came In Through The Bathroom Window
Lucy In The Cacophonator With Diamonds
Got To Get Cacophonator Into My Life
A Hard Day’s Cacophonation
You’ve Got To Hide Your Cacophonator Away
Cacophonator Wants to Hold Your Hand

It may be more convenient to listen to the entire album: “Cacophonator 2: Electric Boogaloo; A Love Tragedy in 11 Parts” on the RPM Challenge site’s Cacophonator page. Just scroll down to “My Player.”  There is plenty of February left: I encourage everyone to participate!

The Milwaukee Makerspace Theater

BIG_HMMMMMM2

Around 25 members have hopped in the new Milwaukee Makerspace Theater after the last two Tuesday meetings.  Its up and running in a “no hearing protection required” way!  The bass still goes way down to subsonic tones, but its being powered by a small & sensible surround sound amp.   Its a very immersive audio experience, and likely sounds much better than any 5.1 system you’ve heard because there’s only one seat!  The sound has been optimized for the single theater-goer: You!  The theater is hooked up to a DVD player, and is available 24/7  for any member to watch a movie in: no check-out required.   Note that any video source you have can be hooked up via the HDMI cable.  Alternately, you can follow the lead of JasonH, who used the theater with a portable audio player to rock out while he worked on his own project near by. See the photos below for the simple instructions on how you can start up the theater, and feel free to take a break from making by using the theater!

123456789

Home Theater with Insane Subwoofer

After the mediocre commercial successes of some of my previous audio products, I decided to pursue a project that has absolutely no commercial potential.  Although my Automated Gmail Assistant had a 0.1% view to purchase rate, they definitely delighted their new owners!   On the other hand, my novel audio surround sound processor, audio-visual processor and audiophile headphones did not produce any revenue, despite being manufactured in an exclusive edition of one each.  Not to be discouraged, the goal of this project was to expand on the core idea behind the aforementioned audiophile headphones, but to overcome the main two drawbacks of using headphones:  1) Many people find that headphones are too uncomfortable and impractical for long term listening. And 2) most headphones lack the concert-like visceral bass impact, which is that feeling of the kick drum shaking your chest that only rock and roll shows could provide.

BIG_HMMMMMM2

Simply put, the Humorously Maniacal Milwaukee Makerspace Multimedia Machine (HMMMMMM) is a personal sized movie theater, with 5.16 surround sound.  That’s right, this theater is like a conventional 5.1 home theater, but with 15 extra subwoofers to delight the senses. While the bass in a live concert can be felt in your chest, the bass in the HMMMMMM can be felt in your soul(!).  In addition altering listener’s consciousness, the HMMMMMM will soon be used to screen our yet-to-be-filmed Milwaukee Makerspace orientation video as an integral part of our onboarding process for all new members. The HMMMMMM measures about 7 feet long and about 4 feet wide.  An eager movie-goer can simply climb up the integral stairs (shown on the left) and jump in through the 27” diameter escape hatch in the top of the HMMMMMM. Despite its crazy appearance, the HMMMMMM offers a surprisingly comfortable reclining position, much like that of a lazy-boy.  Check out this photo of the HMMMMMM under construction for a better idea of the ergonomic internal layout: There is a pillow for one’s head, and ones feet extend to the right.  The 27” display is mounted to the angled portion on the top surface, about 24” from the viewer.  Eventually, two 24″ monitors will expand the visual experience into the periphery.

The_Incomplete_HMMMMMM4

The audio portion of the HMMMMMM is a 5.16 system.  The high frequencies are played by 5 uninteresting Swan/HiVi speakers that are arranged in a properly boring 5 channel surround configuration.  The more exciting portion of the audio system is the subwoofer – well, the 16 (Sixteen) 10″ high efficiency subwoofers that provide that TrueBass™ sensation the masses crave.  Its clear from the use of 16 subwoofers that one object of the HMMMMMM was to create an audio system that plays low bass.  Playback of really low bass typically requires an extremely large speaker box, and still notes as low as 20 Hz are rarely audible.  However, inside any speaker box the bass response is naturally flat to much lower (subsonic) pitches.  For more on the sound pressure level inside and outside speaker boxes, check out this link.  The graph below is a measurement of the SPL or sound pressure level (how loud it is) versus frequency (pitch) at the listener’s ears in the HMMMMMM.

SPL_in_HMMMMMM

The graph shows that with a sine wave input, the SPL inside the HMMMMMM is 148.6dB at 40 Hz.  That means the acoustic pressure on the 27” diameter escape hatch is 45 pounds.  Excellent.  Note that earplugs in addition to earmuff style hearing protectors are mandatory to safely experience the TrueBass™.   To understand this strict hearing protection requirement, lets compare the sound pressure level inside the HMMMMMM to other audio systems that may be more familiar.  Note that the loudness of these other audio systems are not visible in the graph above, because essentially all other audio systems (including yours) are inferior.  Adjusting the margins of the graph a bit produces the following graph:

SPL_of_many_systemsThe plot shows how loud typical audio systems are, and how low they play.  For example, cellphone speakers play only a bit below 1khz, and are ~90 dB if they’re 40cm from you.  When a Jambox-type bluetooth speaker is about 60cm from you, it plays ~10 dB louder, and another 1.5 octaves lower, to 200 Hz.  Typical bookshelf speakers can get another 5 dB louder if you’re 1.5 meters from them, but only play down another octave to 100 Hz.  OEM installed car stereos are a big improvement, but they’re still not in the same league as the HMMMMMM.  Yes, the IASCA record holding car is louder than this, but it plays only from 50 Hz to 60 Hz, which isn’t even really bass.

Note that the difference in loudness between a cellphone and a car is 20 dB, while the HMMMMMM is 30 dB louder than a high-performing car stereo.  Also note that the frequency range of a piano, with its 88 keys, is about the same as a bookshelf speaker – a bit over 7 octaves.  Surprisingly, the subwoofer portion of the HMMMMMM has a 6 octave bandwidth, but it plays the 6 octaves you’ve never heard before!  The HMMMMMM plays 6 octaves below what your bookshelf speaker or Jambox calls bass. The HMMMMMM has a +/- 6 dB passband extending down to 2 Hz, with the output at 1 Hz being nearly still above the 120 dB “threshold of pain.”

Disclaimers: For safety, the big 2000 Watt amplifier that drives the HMMMMMM to its full potential is not available when the author is not present.  Ironically, the author has taught 75-100 people, the eager early HMMMMMM listeners, how to properly insert earplugs, meaning that the HMMMMMM is actually a learning tool for hearing safety! Finally, the author has some hesitancy in having the HMMMMMM reproduce recordings with 5 Hz content at 140 dB, because typical hearing protection has little effect at these unnaturally low frequencies.

PS:  Please don’t hesitate to contact me if you’d like to help with the video scripting, filming or editing.

Snow-Globe Video

Just a minor update here from my recent Snow-Globe blog entry ( http://milwaukeemakerspace.org/2012/12/custom-snow-globe/ )

I made two VIDEOS about the snow-globe. The first is just a brief video showing the finished project. The second video is a longer “How-To” which includes some video, but is mostly a photo slide-show of all the steps I took to create the project.

For an in-depth step-by-step of how I built the project, check out the info I posted on Instructables. http://www.instructables.com/id/Custom-Singing-Snow-Globe/

-Ben