Occasionally back in the day,  I would breakout the linoleum blocks and the speedball cutting tools, and carve out a design to make block prints.  My experience in making prints spans from potato carvings to cardboard stencils, linoleum and wood blocks.  As designs became larger, complex, and multi-color, the time it would take to carve the block plates, made finishing a project difficult at best.

Then, the laser cutter…..

Using the adobe suite of products I created two black and white drawings to be translated to wood blocks.

Unlike traditional transfer/carving methods, I decided to utilize the 60W laser to etch the images into poplar wood vs. carving.  I chose poplar for its hardness and ability not to warp as easy as pine or other softer woods.  60W laser setting was 100 power, 60%speed, 500 PPI

The image below is a 5″x7″ laser cut of the black plate of the rooster image.

Top-Left is the black plate for the left facing rooster.  Bottom-left is the red plate for the left facing, top-right – red plate, bottom right – black plate

The following image shows the red left-facing plate printed, and the black plate inked up and ready to be printed

The first red/black rooster print, along side the right facing black print.

And of course, if you do one, you have to do many.