Category Archives: mill

Magic Mirror Theater Prop

Posted on by BrantH

My sister is a Theater Manager at the Patel Conservatory in Tampa, FL.  About two weeks ago she texted me and asked if I could make her a prop she needed for an upcoming production.  “How keen would you be on making me a mirror for “Beauty and The Beast,” she said.  “They want a mirror that lights up and sparkles like the one from the movie.” Even with limited experience just tinkering around, I knew I could do something fairly easily, so I agreed and got to work.

I combined two different circuits (a 555 timer to flash and a RC circuit to fade) and built a wooden frame with acrylic plates for the front and back.  The wood and plastic were CNC-milled, then sanded and painted before the electronics were installed and glued into place.

The result was a fairly decent-looking, shiny, light-up hand mirror with a small thumb button on the right side that flashes 16 bright green LEDs when pressed.  It all runs off a single 9-volt battery and the back can be unscrewed to replace it should it ever die.

Total build time from start to finish was probably close to 15 hours over the course of one week.  The play was Thursday, July 19th and from what I’ve heard, it was a great success.  I’ll add pictures from the performance if I get some.

Casting Furnace Update

Posted on by BrantH

Despite summer vacation and other obligations, work continues to progress on the Casting Furnace.  In the past few weeks Bret has pinched the end of a metal brake line tube used to feed the furnace diesel fuel and installed a needle valve to better control the fuel flow rate.

Brant has been milling and machining parts for a mechanism that will both lift the lid and turn it out of the way when someone steps on a foot pedal.  The next steps will be to finish the foot pedal, weld it to the rig, and secure the lid to the top of of the lifting post.  Bret also plans to improve the casting tongs so they are more easy to use.

For more information, see the project wiki page: http://wiki.milwaukeemakerspace.org/projects/casting_furnace

First DIY CNC Club Meeting

Posted on by BrantH

Today marked the first monthly meeting of The DIY CNC Club at Milwaukee Makerspace.  Ron Bean and Tom Gondek, the creators of the router, guided members and guests through the use of CamBam CAD software to generate G-code and Mach3 software to operate and control the router.  The day before, Tom and Mike tested the machine’s ability to cut aluminum.  On Sunday, Rich created a decorative wooden sign and Brant began making plastic shapes for a project enclosure. As Ron pointed out, in less than 24 hours we had worked in three different materials: wood, metal, and plastic.

Several items were also crossed off our wish list.  Two emergency stop buttons were added to the front of the machine and wired together in series.  Hitting either one stops all motion in the X, Y, and Z planes and pauses the program.  We also built a relay-controlled receptacle box that when wired into the CNC computer, will be able to stop the spindle so hitting the E-stop will kill all motion in all axes and the router.  For some reason the pins we’re using on the parallel port are only producing 1.6 volts instead of the 3 or 5 we expected and the relays won’t turn on.  All in all, a very productive weekend.