Category Archives: Membership

Iron Casting: Spring Iron Pour

Posted on by Arnold, David

The Casting Area is running another Iron Pour.

This Event will be open to participants, Members and Non-Members.

Please contact Dave directly if you are a Visiting Artist/Non-member and need studio time to make your own artist mold. All non-members must sign the “Iron Casting Waiver” to participate.

Studio Time is to be scheduled in advance. If you plan on bringing a mold or making a mold all weights must be estimated and metal must be broken by said attendee. If you are unable to break iron due to medical reasons please reach out to Dave.  

Resin-bonded sand molds are weighed before they get to the pour floor. 

Artist Tile and Doodle Bowl Workshops:

Saturday 03-23-24 @ 12:30-3:30
Sunday 04-07-24 @ 12:30-3:30
Saturday 04-20-24 @ 12:30-3:30

Saturday April 27th 
We are planning to have the Safety Meeting at noon. If you plan on participating on the pour floor, show up to the safety meeting and sign the waiver, it’s required. Observation will be available from the north side of the pour floor. Observation will only be accessible from Norwich Ave. The proposed Schedule is the following:

8:00am Pour floor setup (leveling and placing molds)
9:00am Scratch blocks & Doodle Bowls available for sale.

10:30am burn-in (preheat furnace with immersion burner forced air and natural gas) 

12:00 safety meeting Immediately after the safety meeting, we go on blast.

*Going on Blast – removing immersion burner and attaching Blower to the furnace and entirely running of forced air and Coke Start charging iron/coke as it settles

1:00pm Should have first tap, Tapping every 13 minutes. 

4:00pm Drop bottom when all molds are filled – brief clean up.

 

Sunday, April 28th 

10:00am Clean-up and devesting molds:

Clean-up is required if you have an artist mold on the pour floor. All Artist Tiles/Doodle Bowls will be out on display for pickup. No additional payment is required for these items. For Artist Molds, gating and pour cups may be cut off and thrown in the iron pile.

Please weigh your castings and provide payment in the donation bin or via Wild Aprocot bit.ly/3wKtOcS Please Refer to the rates section for pricing https://wiki.milwaukeemakerspace.org/areas/casting/rates

Contact Dave for more information at dave@davidmarnold.com or via cell phone 4142150499

Statement from the Board Members

Posted on by Alden Hoot
The murder of George Floyd and the subsequent protests against police brutality have brought fresh light to the ongoing gross inequalities experienced by black, brown, immigrant, and minority communities here and across the nation. As individuals, we believe that the Makerspace as a community organization must not remain silent on these issues. We stand united with those who are struggling to achieve justice and equality.
 
Although the Makerspace has long prided itself on its diversity of opinion, we acknowledge that we have not yet achieved a similar degree of cultural and ethnic inclusivity. We know we have a lot of listening and learning ahead in order to change this. Nevertheless, today we reaffirm our stance that making is for all people and we pledge to do more to provide our members with equal opportunities for success within our own space.
 
We are actively re-examining our member conduct policies to ensure that no voice goes unheard, and no member feels unwelcome. We call on our fellow members to find ways they can better support and uplift our neighbors, colleagues, friends and family in the black community at all times, and in this particular moment of strife. We also welcome everyone’s feedback (however specific or general), on how the membership (Board included) might make further progress towards these goals.
 
To the communities who have been affected by inequality, we are listening, we see you, and we stand with you.
 
Be safe and look out for one another,
Milwaukee Makerspace Board of Directors

Member Graph

Posted on by Chris Hemmerly

Well, Pete did us a solid with the HMMDMMH.. I took it to the next level, by graphing the data the HMMDMMH provides!

MMMG

MMMG

You can change the number of weeks’ worth of data it displays, by adding “&weeks=xx” to the URL, like this.  There’s a little bit of missing data here and there, which is why there are some skipped week numbers. Right now, I’ve collected approximately 25 weeks worth of data. This will only grow as MMS does, though! You might end up seeing this in the MMMPIS too!

Also, coming soon: A stand-alone executable version (for Windows) of the HMMDMMH!

EDIT: 2014 Week 26: After this was implemented we looked closer at the numbers and found an error. It has been corrected, hence the drop

2013 Annual Member Survey Results!

Posted on by BrantH

Feedback and constructive criticism can be great tools for planning and managing any sort of endeavor.  Gauging the interests, concerns, and opinions of our group can help us make better decision on how to spend time and money as well as working with each other and the community.  Last month we asked our members to take a survey and share their thoughts with us.  Why do people come to Milwaukee Makerspace?  What do they do here?  What would they like to see more of?  What can we do better?  44 members responded (or about 39% of the total group) and after spending some time slaving over spreadsheets, we published the results.

Two of the biggest questions we asked survey-takers were: 1) What do you come to Milwaukee Makerspace for? and 2) What is important to you?  The following results can be found in our 19 page report, available for download here:  http://wiki.milwaukeemakerspace.org/_media/2013_annual_mms_member_survey.pdf

2013survey-reasons

Image 1 of 2

 

hmmdmmh

Posted on by Pete Prodoehl

How Many Members Does Milwaukee Makerspace Have?

I know the question you’ve been asking… How Many Members Does Milwaukee Makerspace Have?

Well fear not, Makers… we’ve got you covered. Just visit hmmdmmh on the Global InterWeb Network and you’ll have the answer.

But wait! I can hear you saying “Hey there Lord of Numbers and Hackmaster General, I’m on my Mobile Smart Device, will this even work!?” And the answer is yes… yes it will.

How Many Members Does Milwaukee Makerspace Have? (Mobile Edition)

Rather than force you to install an application specific to your Mobile Platform through some silly “App Store” we decided to use the latest in Web Standards to deliver this information to you. (We call this version ‘hmmdmmhm’ with an extra ‘m’ for ‘mobile’.)

What’s that? Oh yes, how does it work? Well, right now it reads the data from this page, parses it, and stores it in a special Linux-based file system, then displays it to you. In the future our custom membership software will provide an API to get this data, but for now… it’s all beta, so just go with it.