Julie and Carl of Scoops Ice Cream & Candies of Kenosha, approached new Makerspace member, Brandon Minga, with their project. They were given recommendations from other projects he’s done in the are including Mike’s Chicken & Donuts and the Modern Apothecary. Scoops was looking to enhance and draw more attention to their new location with a large exterior sign. Going through the concept and design process Minga quickly decided that the sign design was also going to become their new logo. Once the final design was rendered he quickly learned how to CNC a template to hand plasma trace the design out of sheet metal. The middle of the sign was also hand cut, roll bent and broke to match the bubbly ice cream cone shape. With a little help from friends a the Makerspace, he ground down welds and drilled 44 holes for the light bulbs. After all the holes were drilled Minga fit the sign with sockets, wired up the sockets and tested the electrical. Working with Prodigy Sign in Kenosha he also coordinated the hanging of the sign.

Any project starts with a sketch.

Nothing wrong with learning a little g-code.

 

A post shared by Mingadigm (@brandonminga) on May 2, 2017 at 12:47pm PDT

Took that g-code and used the handmade CNC router to cut out a template (note to self, don’t use OSB for plasma templates).

Traced template with hand plasma cutter.

Hand cut, roll bent, metal break and tack welded the bottom shell.

Hand cut and used the break to bend my own c-channel for the stabilizing guts of the sign.

A little help from my friends!

 

A post shared by Mingadigm (@brandonminga) on Mar 31, 2017 at 3:33pm PDT

A little custom install and wiring….and we have lights!

Can’t forget the paint! Primed inside and out, the sign got coated with some retro color.

Installation day was very windy, they called two crews in to stabilize the sign as they anchored it to the building.

This is a Mingadigm.com by Brandon Minga

This project was done at the Milwaukee Makerspace,  thank you, gang!