The Casting Area is running another Iron Pour.

This Event will be open to participants, Members and Non-Members.

Please contact Dave directly if you are a Visiting Artist/Non-member and need studio time to make your own artist mold. All non-members must sign the “Iron Casting Waiver” to participate.

Studio Time is to be scheduled in advance. If you plan on bringing a mold or making a mold all weights must be estimated and metal must be broken by said attendee. If you are unable to break iron due to medical reasons please reach out to Dave.  

Resin-bonded sand molds are weighed before they get to the pour floor. 

Artist Tile and Doodle Bowl Workshops:

Saturday 03-23-24 @ 12:30-3:30
Sunday 04-07-24 @ 12:30-3:30
Saturday 04-20-24 @ 12:30-3:30

Saturday April 27th 
We are planning to have the Safety Meeting at noon. If you plan on participating on the pour floor, show up to the safety meeting and sign the waiver, it’s required. Observation will be available from the north side of the pour floor. Observation will only be accessible from Norwich Ave. The proposed Schedule is the following:

8:00am Pour floor setup (leveling and placing molds)
9:00am Scratch blocks & Doodle Bowls available for sale.

10:30am burn-in (preheat furnace with immersion burner forced air and natural gas) 

12:00 safety meeting Immediately after the safety meeting, we go on blast.

*Going on Blast – removing immersion burner and attaching Blower to the furnace and entirely running of forced air and Coke Start charging iron/coke as it settles

1:00pm Should have first tap, Tapping every 13 minutes. 

4:00pm Drop bottom when all molds are filled – brief clean up.

Sunday, April 28th 

10:00am Clean-up and devesting molds:

Clean-up is required if you have an artist mold on the pour floor. All Artist Tiles/Doodle Bowls will be out on display for pickup. No additional payment is required for these items. For Artist Molds, gating and pour cups may be cut off and thrown in the iron pile.

Please weigh your castings and provide payment in the donation bin or via Wild Aprocot bit.ly/3wKtOcS Please Refer to the rates section for pricing https://wiki.milwaukeemakerspace.org/areas/casting/rates

Contact Dave for more information at dave@davidmarnold.com or via cell phone 4142150499

3 years ago I started participating in the Grow Beyond Earth contest.  It’s a collaboration between NASA and the Fairchild Botanical Gardens in Florida.  The goal is to create a device that will grow food on the International Space Station.  That sounded like fun to me!  Year one focused on designing the growing area to take advantage of the 0G environment and fit in a 50cm cube.   I was fortunate enough to be a finalist and walked away with some prize money.  I was not able to participate in the 2nd year but I am back in for year 3. 

This year the focus is on creating a robotic harvesting and planting.  If you want to read all about it you can do so at the Make:Projects link below.  This has been a fun project and I learned so much.

https://makeprojects.com/project/0g-garden—year-3-professional-entry

Julie and Carl of Scoops Ice Cream & Candies of Kenosha, approached new Makerspace member, Brandon Minga, with their project. They were given recommendations from other projects he’s done in the are including Mike’s Chicken & Donuts and the Modern Apothecary. Scoops was looking to enhance and draw more attention to their new location with a large exterior sign. Going through the concept and design process Minga quickly decided that the sign design was also going to become their new logo. Once the final design was rendered he quickly learned how to CNC a template to hand plasma trace the design out of sheet metal. The middle of the sign was also hand cut, roll bent and broke to match the bubbly ice cream cone shape. With a little help from friends a the Makerspace, he ground down welds and drilled 44 holes for the light bulbs. After all the holes were drilled Minga fit the sign with sockets, wired up the sockets and tested the electrical. Working with Prodigy Sign in Kenosha he also coordinated the hanging of the sign.

Any project starts with a sketch.

Nothing wrong with learning a little g-code.

 

A post shared by Mingadigm (@brandonminga) on May 2, 2017 at 12:47pm PDT

Took that g-code and used the handmade CNC router to cut out a template (note to self, don’t use OSB for plasma templates).

Traced template with hand plasma cutter.

Hand cut, roll bent, metal break and tack welded the bottom shell.

Hand cut and used the break to bend my own c-channel for the stabilizing guts of the sign.

A little help from my friends!

 

A post shared by Mingadigm (@brandonminga) on Mar 31, 2017 at 3:33pm PDT

A little custom install and wiring….and we have lights!

Can’t forget the paint! Primed inside and out, the sign got coated with some retro color.

Installation day was very windy, they called two crews in to stabilize the sign as they anchored it to the building.

This is a Mingadigm.com by Brandon Minga

This project was done at the Milwaukee Makerspace,  thank you, gang!

Our 3 cars raced with 34 others in the biggest Power Racing Series event to date on the biggest track ever made.  It was great to see all the hard work paying off as the builders of the cars became the happy drivers of the cars. Both days of races were streamed live by our friends at Make Magazine to Twitch.tv where they can still be watched. Be sure to check out the race at Maker Faire Milwaukee September 24th-25th.

Check out the race from day one at the link below:

https://player.twitch.tv/?volume=1&video=v80805800&time=04h50m54s

Make sure not to miss this weekend’s Nerdy Derby at American Science and Surplus. Adrian and the rest of the nerdy team will be helping kids and kids at heart turn blocks of wood into rolling masterpieces of speed. If you have not been to a Nerdy Derby event this will be one not to miss.  3D printed wheels have been coming in from printers all over the city and from our Makerspace 80 at a time.

Building a car is easy and there will be a nice long track to race down once you’ve finished your creation.  You start by picking a block of wood and some wheels. After a bit of nailing its off to nerdy up your car from piles of amazing decorations. Makers are encouraged to decorate, test, and re-decorate. Everything that you glue onto a car affects the way it moves down the track. See you there!

Tuesday meetings often turn into training night at the Makerspace.  So many members come the the weekly meeting that it can be easy to find something new to learn.  Last week was no exception when Pete gave an intro to screen printing.

It seemed like a straight forward process and I would encourage people who want to try making a t-shirt to email Pete to get checked out on the machine.

After walking the class through the basics of preparing the silk with the design. Pete set up an example print and let his small class of makers give it a try.

There are many possible solutions.  I can add a heater to the exit port to prevent formation of ice, or dry the air going into the box using a dessicant cannister or maybe just use water ice instead of dry ice if the higher temperature will still cool the chocolate adequately.   Maybe using an old miniature freezer with an air hose coiled inside would do the job.  It would be really interesting if I could use the waste heat from a freezer to keep the chocolate liquified and flowing.  Back to the drawing board!

A couple weeks ago I got a blower from American Science and Surplus and this week I got it running by using a model airplane ESC and servo tester to drive its brushless DC motor.  It appears to be capable of blowing much more air than I’ll need.  There are many unknowns yet to test.  How much chilled air/CO2 will it take to solidify the chocolate after it leaves the extruder?  How long will a block of dry ice last when used this way?  Will ice build-up inside the chiller box adversely affect its performance?

I designed and printed three parts for this system- a mount to attach the blower to a foam box up to 1.5″ thick, a hose coupler to allow delivery of the chilled air/CO2 to the print, and a hole saw to cut holes to fit the other two parts.   The printed parts fit as if they were designed for the job!

3D printed hole saw

Hose connected to hose coupler

Hose coupler parts

Blower mount for air chiller box

I mixed about 1 liter of extra thick pancake batter to a consistency that I thought would be much thicker than molten chocolate (pancake batter is much cheaper than chocolate) and shoveled it into the syringe, then bolted on the pusher and hooked it up to a power supply:

Looking back, I probably should have loaded the syringe from the other end.

Syringe loaded with super thick pancake batter.

Here’s the actual test.  It gets especially interesting about 1 minute in:

The syringe continued drooling after power was removed due to air that was trapped inside the syringe.  As the plunger pushed, the air was compressed.  When the motor stopped the compressed air continued to push out the batter.  I will have to be careful to eliminate air bubbles in the material when it comes time to use this in a printer.

It only took a couple minutes to clean out the syringe after the test was done.

The pusher did its job much better than expected, and the plunger held up just fine, too.  I feel confident that this device will be able to extrude chocolate.   Now the real work begins…

Son of MegaMax

Please see my Instructable here:  http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/and vote for me by clicking the little red “vote” ribbon in the upper right corner of the start page.

Thanks!

http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/