The Casting Area is running another Iron Pour.

This Event will be open to participants, Members and Non-Members.

Please contact Dave directly if you are a Visiting Artist/Non-member and need studio time to make your own artist mold. All non-members must sign the “Iron Casting Waiver” to participate.

Studio Time is to be scheduled in advance. If you plan on bringing a mold or making a mold all weights must be estimated and metal must be broken by said attendee. If you are unable to break iron due to medical reasons please reach out to Dave.  

Resin-bonded sand molds are weighed before they get to the pour floor. 

Artist Tile and Doodle Bowl Workshops:

Saturday 03-23-24 @ 12:30-3:30
Sunday 04-07-24 @ 12:30-3:30
Saturday 04-20-24 @ 12:30-3:30

Saturday April 27th 
We are planning to have the Safety Meeting at noon. If you plan on participating on the pour floor, show up to the safety meeting and sign the waiver, it’s required. Observation will be available from the north side of the pour floor. Observation will only be accessible from Norwich Ave. The proposed Schedule is the following:

8:00am Pour floor setup (leveling and placing molds)
9:00am Scratch blocks & Doodle Bowls available for sale.

10:30am burn-in (preheat furnace with immersion burner forced air and natural gas) 

12:00 safety meeting Immediately after the safety meeting, we go on blast.

*Going on Blast – removing immersion burner and attaching Blower to the furnace and entirely running of forced air and Coke Start charging iron/coke as it settles

1:00pm Should have first tap, Tapping every 13 minutes. 

4:00pm Drop bottom when all molds are filled – brief clean up.

Sunday, April 28th 

10:00am Clean-up and devesting molds:

Clean-up is required if you have an artist mold on the pour floor. All Artist Tiles/Doodle Bowls will be out on display for pickup. No additional payment is required for these items. For Artist Molds, gating and pour cups may be cut off and thrown in the iron pile.

Please weigh your castings and provide payment in the donation bin or via Wild Aprocot bit.ly/3wKtOcS Please Refer to the rates section for pricing https://wiki.milwaukeemakerspace.org/areas/casting/rates

Contact Dave for more information at dave@davidmarnold.com or via cell phone 4142150499

For the past 2 months a team of makers has been frantically designing and building a glider for Redbull Flugtag.  It was one of the most fun projects I have ever had the privilege of working on.  Thought we did not place in the competition I wanted to share what we have learned and share some CAD files for future Flugtag builders to find and reference if they wish.

Team Flies at All:

When I put up the call to see if other members where interested in participating I was shocked when almost 20 people came to the first meeting.  At that meeting two opposing directions were posed for our entry.  One was a craft that would be as crazy as possible that would just be fun to look at and not attempt flight in a meaning full way.  The second was “team flies at all” who thought the fun part of the project would be the challenges of making a craft that would generate lift.  As the next weeks went on that second team was the only group that kept meeting and planning.  

Material choice and testing:

At one of the first design meetings Jon Drayna brought in a sample that he had worked on that week that would become the structure of our design.  It was 1 inch pink insulation board laminated on either side with 2mm strips of wood.  This made the normally flexible material very ridged while still being extremally light weight.

With this structure in mind I went to work in Fusion 360 and modeled up a craft.  Using a paper added to a google drive the team was sharing I was able to design a parametric air foil that would in theory provide high lift at low speed.  I even devoted the weekly Fusion 360 class to making an airfoil.  Below is a link to that class and the parametric airfoil Fusion 360 file will be in the link at the bottom.

We chose to cover our wings with window cling film.  I think this is one of the best choices we made.  Even though the film required lots of care it was cheap and light weight compared to alternatives.  On the day of the event we saw boat vinyl and lots of other materials but I stand by our window film.  Another decision that I was happy with on our craft were the ridged supports in the front and back of our wing.  Lots of teams chose not to do this and their air foil shapes were lost due to the shrinking material. 

Our biggest lesson:

If you have ever attempted to do something for the first time before you know that it usually doesn’t work.  We all had lots of optimism about our chances to “fly” but it takes practice to learn new things.  You can’t make an omelet with out breaking a few eggs.  On Flugtag our point of failure was the cart.  We knew that if the back of the cart were to push up on the back of the glider it would push the nose down right into the water.  We had taken care to design a two part cart that would we thought drop away from the craft with the use of a one way hinge mechanism.  The idea was as the front of the cart holding the glider went off the edge it would fall down bending at the hinge and not creating leverage lifting the back of the glider.  Maybe it was swelling due to humidity or jus the paint being sticky but this was our point of failure.   You can see in the video the cart breaking part of the tail as it forced it up and as soon as it fell away the wings started to work.  It was too late at that point though.

I use used a bad word in that last paragraph, failure.  At least most people think of it as a bad word.  Lets reframe that right now.  Failure is what happens on the path to success.  Failure is what happens when you are pushing your self far beyond your current capabilities and knowledge.  No one has ever learned something from success it is failure that teaches us and failure that motivates us.  

We failed to fly but we succeeded at working together to build one of the coolest projects to ever come out of this building.  It was so much fun working with everyone that pitched in for an hour or two or for weeks on end.  The bravest member of the Makerspace, Faith, got to stand on a stage in front of 50,000 people and answer questions about what a the Milwaukee Makerspace is.  I have zero regret except for maybe not jumping of the edge of the ramp…

Open Source Everything:

We learned so much.  You can take a look at our CAD files and build images and learn with us.  All are at the link below for you to copy and improve.

Open Source Project Link.

Every Wednesday at for the past few months Jeff has been hosting “Cervesia and Ceramics”.  It’s an evening playing with clay fueled by the power of beer.  Over the past few months I have seen Jeff do wheel throwing classes, hand building seminars, and general clay based standup comedy (mostly while sitting at a wheel). 

Every week members stop by just to hang out a chat or to join us for a beer.  Some of those on lookers even get talked into getting their hands full of clay.  If you have never picked up a lump of clay ask Tom Klein about his experience a couple weeks ago when Jeff peer pressured him into sitting down at a wheel for the first time.  

Stop in tomorrow or any Wednesday.  The Milwaukee Makerspace is by far the best ceramics studio in the Milaukee area also the most affordable.

The holidays are coming, and that means it’s almost time for Makesgiving, our Holiday Make-A-Thon! Over the past eight year we’ve set aside the Friday after Thanksgiving to welcome aspiring makers to join us in making things for the holidays, because making is awesome, and a gift that’s made is better than a gift that’s bought.

There will be a variety of making activities, some old favorites will return, and we’ll have a few new things up our collective sleeves. Skips the madness of the mall and come hang out at the space with us! You probably have questions, but don’t worry, check out our Makesgiving Holiday Make-A-Thon page for the answers.

It’s happening on Friday, November 29th, 2019 from 1pm-5pm and it’s free and open to the public, though we do ask that you register so we can plan appropriately for the event. We hope to see you there!

This is how excited you’ll be at Makesgiving.

If you’re a fan of the TV show Innovation Nation, you’re in luck! They’ve created a live show and they’ll be bringing it to Milwaukee on November 23rd & 24th, 2019 to the Marcus Center’s Wilson Theater at Vogel Hall.

The Henry Ford’s Innovation Nation – LIVE! will inspire audiences with entertaining and educations stories about yesterday and today’s visionaries and innovators – highlighting major turning points in the past and present that influenced the fields of science, technology, engineering, math, the environment and social justice.

The show will feature two correspondents that will narrate the evening, engage with the audience and bridge between stories of innovators of the past and how they are influencing science, technology, agriculture, design, making and social justice movements of today. Luminaries of the past including Henry Ford, The Wright Brothers, Rosa Parks and George Washington Carver among others will jump to life on stage. Their achievements will be highlighted and reflected by showing examples of present day innovations.

Tickets are available now, so get them while they last!

Tickets are available at: MarcusCenter.org | Marcus Center Box Office: 414.273.7206 | Groups 10+ Call 414.273.7121 x210

Our 3 cars raced with 34 others in the biggest Power Racing Series event to date on the biggest track ever made.  It was great to see all the hard work paying off as the builders of the cars became the happy drivers of the cars. Both days of races were streamed live by our friends at Make Magazine to Twitch.tv where they can still be watched. Be sure to check out the race at Maker Faire Milwaukee September 24th-25th.

Check out the race from day one at the link below:

https://player.twitch.tv/?volume=1&video=v80805800&time=04h50m54s

Make sure not to miss this weekend’s Nerdy Derby at American Science and Surplus. Adrian and the rest of the nerdy team will be helping kids and kids at heart turn blocks of wood into rolling masterpieces of speed. If you have not been to a Nerdy Derby event this will be one not to miss.  3D printed wheels have been coming in from printers all over the city and from our Makerspace 80 at a time.

Building a car is easy and there will be a nice long track to race down once you’ve finished your creation.  You start by picking a block of wood and some wheels. After a bit of nailing its off to nerdy up your car from piles of amazing decorations. Makers are encouraged to decorate, test, and re-decorate. Everything that you glue onto a car affects the way it moves down the track. See you there!

Check out our pictures:

Cheers!

Since 2010 Milwaukee Makerspace has partnered with Bucketworks to host a Holiday Make-A-Thon on the Friday following Thanksgiving. What do we do at the Make-A-Thon? We make things of course, but more importantly we make things for the holidays and help children of all ages make holiday items for gifts, decorations or donations.

Typically this event was held at Bucketworks. In 2013 Bucketworks was moving into their new space so the event was held at the Milwaukee Makerspace in Bayview.

The question for 2014 is “where are we going to hold the Holiday Make-A-Thon” or is it Make-A-Thons?

The answer is we can have multiple Make-A-Thons at different locations, hosted by different groups on the same day.

Please join us for the Holiday Make-A-Thon happening at the Milwaukee Makerspace and the Mini Make-A-Thon happening at UberDork Cafe on Friday November 28th, 2014 from 1:00pm to 6:00pm.

This event is competely free and we ask for donations to help cover the cost of materials.

Activities
Some of these are tentative and will rely on people to volunteer to make them happen!

• Decorate a laser-cut ornament
• Design a laser-cut ornament
• Learn to solder a tie-pin
• Design & 3D print a cookie cutter
• Make a necklace / bracelet
• Make a rose pin
• Decorate your own gift wrapping paper
• Fold a paper diamond ornament
• Make a woodcut print

Refreshments
Want to bring something delicious to share? Please do!

• Cookies
• Pie
• Leftovers!